Dear GOTD users,

It has been a loooooooong time since the last giveaway of WonderFox HD Video Converter Factory Pro was distributed at GOTD. We’re pleased to inform you that this software has been updated to V9.4 with lots of great improvements.To make users experience the great changes, we are holding the new giveaway exclusively for you.

Please follow the full guide here to participate in this giveaway:
1. Download WonderFox HD Video Converter Factory Pro from GOTD promotion page.
2. Unzip the installer pack.
3. Install and register it with the license code provided in the pack.
If you have registration problem, please leave your question here or send email to support@videoconverterfactory.com

As usual, the Giveaway Version works the same as Full Version. The only difference is that it does not support free upgrades.

Here, if you want to enjoy the lifetime free upgrades and speedy tech support service, we’d like to offer you a 60% OFF WonderFox HD Converter Factory Pro Family Pack (3 PCs). It's only $19.95.
https://secure.avangate.com/order/checkout.php?PRODS=4637612&QTY=1&CART=1&CARD=1

Extra offer for GOTD users:
Our software become better. It really couldn't have happened without your supports. To express our deep gratitude and also to celebrate Easter, here's an extra offer for GOTD users. We hope you will like it!
http://www.videoconverterfactory.com/hd-video-converter/install.html?g

Besides,any suggestions on our software are warmly welcomed. :)

Sincerely,
WonderFox Support Team

Jenny Tylor  –  8 years ago  –  Avez-vous trouver ce commentaire utile ? oui | non (+31)

Traduire

Installed and registered without any problems on Win 10. Couldn't get the drag and drop to work, had to go through the menu to add a file to convert, and started with a 932mb video file, set it to 720P (hd) and that bumped up the file size to 3.8GB. Seems large, but I'm ok with that. Conversion ran quickly, about 4% done in under 5 seconds (converting while I'm writing this out) Has a small "preview" window showing images of the movie while it's converting. Comparing the two videos, I'm not really seeing much change at all. screen is slightly larger, but graphics pretty much look the same. This does however, convert quickly and efficiently, and a lot better than Aiseesoft video converter that i've been using. Haven't played with the cutting, or merging, or...anything else except converting, but first impressions are really good.

Levitiquetus  –  8 years ago  –  Avez-vous trouver ce commentaire utile ? oui | non (+4)

Traduire

Levitiquetus,
If the resulting video is no better, but four times the size, why would you want to do it in the first place?

Levitiquetus, If the resulting video is no better, but four times the size, why would you want to do it in the first place?
Save | Cancel

george  –  8 years ago  –  Avez-vous trouver ce commentaire utile ? oui | non (+18)

Traduire

Levitiquetus,

"started with a 932mb video file, set it to 720P (hd) and that bumped up the file size to 3.8GB"

That because of the settings you used...

The size of a video file is determined partly by the frame size -- 4k has more pixels per frame than 1080p, which has more than 720p, which has more than 480i etc. The more pixels you have, the more storage space it takes to store them. Fps [Frames Per Second] has a similar effect -- the more frames in a video the more pixels it has to store.

The method of video compression, & the settings used for that, also have a big effect. H.264 [AVC] is arguably the most popular, & it's more efficient than mpg2 or Xvid [often called DivX in these sorts of apps], so files at the same quality will be smaller. There are quality settings, plus bit rate settings which also effect quality -- lower quality &/or lower bit rate settings make for smaller file sizes. H.265 & WebM are similar in working the same way re: file size.

"Comparing the two videos, I'm not really seeing much change at all"

You will ALWAYS have generational loss when you re-encode video, because the methods &/or codecs are lossy, meaning basically that some data is tossed out. That you didn't see much change is good -- my point is that you want to avoid re-encoding as possible because it will always have a cost in quality.

Likewise I think you'll find that very often you'll get better results using the player to control the size of the picture, because of the quality that you lose re-sizing & then re-encoding.

"This does however, convert quickly and efficiently, and a lot better than Aiseesoft video converter that i've been using."

Most of these convertors use ffmpeg for decoding & re-encoding video. Similar QT code is usually used for re-sizing. Because of that, if one is noticeably faster than another, it's probably because of the encoding settings that were used. This can be important. Because you don't have access or control over many of the encoder settings in these converters, unless you check the results with something like MediaInfo & test it, you don't know if quality related settings or features have been turned off for the sake of speed. Likewise you don't know if the results are fully compatible with your intended viewing device.

Levitiquetus, <i>"started with a 932mb video file, set it to 720P (hd) and that bumped up the file size to 3.8GB"</i> That because of the settings you used... The size of a video file is determined partly by the frame size -- 4k has more pixels per frame than 1080p, which has more than 720p, which has more than 480i etc. The more pixels you have, the more storage space it takes to store them. Fps [Frames Per Second] has a similar effect -- the more frames in a video the more pixels it has to store. The method of video compression, & the settings used for that, also have a big effect. H.264 [AVC] is arguably the most popular, & it's more efficient than mpg2 or Xvid [often called DivX in these sorts of apps], so files at the same quality will be smaller. There are quality settings, plus bit rate settings which also effect quality -- lower quality &/or lower bit rate settings make for smaller file sizes. H.265 & WebM are similar in working the same way re: file size. <i>"Comparing the two videos, I'm not really seeing much change at all"</i> You will ALWAYS have generational loss when you re-encode video, because the methods &/or codecs are lossy, meaning basically that some data is tossed out. That you didn't see much change is good -- my point is that you want to avoid re-encoding as possible because it will always have a cost in quality. Likewise I think you'll find that very often you'll get better results using the player to control the size of the picture, because of the quality that you lose re-sizing & then re-encoding. <i>"This does however, convert quickly and efficiently, and a lot better than Aiseesoft video converter that i've been using."</i> Most of these convertors use ffmpeg for decoding & re-encoding video. Similar QT code is usually used for re-sizing. Because of that, if one is noticeably faster than another, it's probably because of the encoding settings that were used. This can be important. Because you don't have access or control over many of the encoder settings in these converters, unless you check the results with something like MediaInfo & test it, you don't know if quality related settings or features have been turned off for the sake of speed. Likewise you don't know if the results are fully compatible with your intended viewing device.
Save | Cancel

mike  –  8 years ago  –  Avez-vous trouver ce commentaire utile ? oui | non (+17)

Traduire

How does one convert standard definition to HD if the original video was taken in SD?

Mike H  –  8 years ago  –  Avez-vous trouver ce commentaire utile ? oui | non (+17)

Traduire

Downloaded and installed and registered on win 10 64 with no problems.
Converted a 21 mb mp4 video to 7mb H265 video file in about 1 minute, with little or not apparent loss of quality. Tested the video download utility on youtube. After short analysis it showed all the available formats and by default selected the highest quality. Download worked with no problems. Then the software automatically performed "merging" of the video with the audio. It took several minutes but the result was very good. Testes the ringtone studio to trim a video file and convert it into an android mp3 ringtone. worked fine.
Intuitive interface, very easy and simple to use. I like it. The only thing I haven't figured out yet is how to apply any eppects on the video to be converted (there's a magic wand icon, but it is greyed out).
overall, I like this giveaway very much. It's compression abilites are good and usefull. It is a keeper. Thank you GAOTD and WonderFox.

Gustav  –  8 years ago  –  Avez-vous trouver ce commentaire utile ? oui | non (+15)

Traduire